Safety tips

 
Safety tips     |     Safety clubhouse     |     Programs     |     Safety bulletins

Gas installations and your safety

SaskPower Gas Inspections oversees all consumer, commercial, and industrial gas installations in Saskatchewan. Our mandate is to ensure that gas installations are performed safely as required by
The Gas Inspection Act 1993 and Regulations.

Red Tag program

SaskPower Gas Inspections assists licensed gas contractors and consumers with identifying and correcting hazardous conditions related to gas-fired equipment. If a gas contractor finds a safety issue the equipment will be “red tagged”. If the situation is immediately hazardous, both the equipment and the gas supply to it will be shut off.  The red tag is then turned over to SaskPower Gas Inspections for follow up. 

This program defines low risk and immediately hazardous conditions for the contractor. Immediately hazardous conditions include situations with:


In all cases, a licensed gas contactor is required by law to complete any repairs to gas-fired equipment. We recommend that for larger jobs you get two or three quotes and ask questions.

Use our Gas Appliance checklist to ensure your family's safety.

Questions? Call SaskPower Gas Inspections at 566-2500 or 1-866-225-2224.

Working with the Mechanical Contractors Association

The Mechanical Contractors Association of Saskatchewan Inc. (MCA) is a trade association for contractors and suppliers of the plumbing, heating, and mechanical industry.

The cooperation between premise owners, your licensed gas contractor, and SaskPower Gas Inspections will keep your gas-fired equipment in better working condition and keep you and your family safe.

Before you hire a gas contractor, refer to these tips from MCA: